212-537-6540       212-202-3763       info@securitystoreusa.com
  1-800-363-2527    |      0

Pelco TW3001AR

Pelco TW3001AR
Custom Order

Custom orders usually ship in 1-2 weeks.

Return Policy

Rating: 0 [0]
Pelco TW3001AR


SINGLE CHANNEL VIDEO RECEIVER ACTIVE VIDEO TRANSMISSION OVER UNSHIELDED TWISTED PAIR WEIGHT 2.8 The TW3001AR is a single-channel active receiver that can receive live video over unshielded twisted pair (UTP) cable. The adaptive technology in the TW3001AR automatically adjusts the low, medium, and high frequency components of the video signal allowing for the best possible video transmission. The adaptive technology eliminates the need for manual adjustment by automatically adjusting to provide the most favorable video transmission depending on cable length needed. The unit has been optimized for use with Cat5e and Cat6 cable, although Cat3 and Cat5 cable can be used for shorter distances. The DIP switch on the bottom of the TW3001AR allows you to override the adaptive technology and manually select the cable distance. You can select either 1,000 feet (304 meters), 2,000 feet (609 meters), 3,000 feet (914 meters), or 4,000 feet (1,219 meters). The LED on the front of the unit indicates the status of the receiver. When it lights red there is no UTP video being received. A green light means that UTP video is being received. A flashing amber light means that there are pan/tilt/zoom (PTZ) and Coaxitron control commands being received. The blue Pelco badge indicates there is power whether you are using the 4-pin rack power connector or the 2-pin power connector. The TW3001AR has built-in surge suppression. The TW3001AR allows for multiple applications. For example, you can connect the receiver to a matrix switcher, such as the CM6800, and to passive devices, such as the TW3001P transceiver balun. The transmission distance when using Cat5e ranges from 1,000 feet (304 meters) to 4,000 feet (1,219 meters). For Coaxitron-control devices, 750 feet (228 meters) is the maximum distance over UTP. The receiver can be mounted into a fiber rack (RK5000PS-3U/RK5000-3U), into the WM5001-3U wall mount base kit, or into the supplied wall clip. Each receiver also has four rubber feet allowing you to place it on a flat surface, such as a desk or shelf. Active, single-channel video receiver.

    Also known as

      On Sale: